Here is a simple drawing of my bolts. The top cocking rod may change between now & when it is made.

Here is a picture of the bolts Bandit Bolts made. Which was based off my design. They have scraped my idea & believe their working on their own now.

This is the picture i drew the night i had the idea of the bolt.

This one was done the following day in Autocad. It's not to scale, just something I put together in about a hour.

This drawing & the following where done in about 3 days (about 4 hours in Autocad). They are to scale. There is a .687 paintball next to the bolt to give an idea of the size.

This is the other half to the above drawing. This shows the internal dimensions to the front & back parts.

Here is my latest drawing. the specs are closer to needed size & i added the part that holds the spring.

This is the more detailed drawings of the 2 parts.

After a long time of not fooling w/ my bolt I did a new drawing. This is ACB-V.1.

[Home][VLM Archive][Technical Section][Custom Parts]

All text, graphics, photos and content, Copyright 2002, 2003 Camaropball's. All rights reserved. Unauthorized duplication prohibited. All data contained herein presented for informational purposes only. Use at your own risk. May cause drowsiness, irritability and violent incontinence. Not responsible for chromosomal damage due to improperly shielded monitors. Do not take internally. Not responsible for excessive chronic disclaimer squinting syndrome. Wash eyeballs thoroughly after use.